skip to content
Pinetek Networks - Knowledge Base
User Tools
Log In
Site Tools
Search
Tools
Backlinks
Add to book
Copy this page
Export to PDF
Sitemap
Log In
>
Sitemap
You are here:
Pinetek Networks Knowledge Base
»
IOL HAT Knowledge Base
»
IOL HAT Hardware Manual
»
2 Connections
Sidebar
Navigation
Frequently asked questions about the IOL HAT
Q: I receive an error about invalid PD from iol-master-appl
Q: I attached an IO-Link solenoid to the IOL HAT, but on switching, the communication fails
Q: I sporadically receive timeouts from the iol-master-appl
IOL HAT Hardware Manual
1 Basics
2 Connections
3 Technical Specifications, Support & Supplier information
IOL HAT Pro Hardware Manual
1 Basics
2 Connections
3 Technical Specifications, Support & Supplier information
Action unknown: copypageplugin__copy
iol-hat:hw:2_connections
2 Connections
2.1 Connections overview
2.2 40-pin GPIO to Raspberry Pi and jumper settings (PT-1201 only)
2.3 Generic Interface (PT-1202 only)
2.4 SDCI Ports and LEDs
2.5 24V-Input
iol-hat/hw/2_connections.txt
· Last modified:
2025/04/18 12:11
by
anla
Page Tools
Backlinks
Add to book
Copy this page
Export to PDF
Back to top
