The power command switches the L+ power on the corresponding port. After switching on, the communication speed on the SDCI (COM1, COM2, COM3) is automatically detected and cyclic exchange of data is started.
Command:
| Octet # | Usage |
|---|---|
| 0 | Command ID = 0x01 |
| 1 | Port index 0x00 or 0x01 |
| 3 | Power status 0x00 = OFF 0x01..0xFF=ON |
Return Success:
| Octet # | Usage |
|---|---|
| 0 | Command ID = 0x01 |
| 1 | Port index 0x00 or 0x01 |
| 3 | Power Status |