Table of Contents
7.1 Technical Data
Mechanical
| Dimensions | 90 x 72 x 63 mm |
| Installation | DIN-Rail |
| Protection class | IP20 |
| Temperature range (environmental) | -25°- 55°C |
Please notice that the maximum output current for L+ decreases with rising temperature. The maximum achievable environmental operating temperature is also depending on the CPU load of the device.
The temperature of 55°C environmental was tested with 4 output ports at maximum L+ current per port.
Connections
Power supply
- DC Input: 24V DC (+/-20%)
- Power consumption max. 2800mA (SDCI port supply included)
The output voltage on the L+ depends on the input voltage and the internal voltage drop of the device. At room temperature, the voltage drop is approximately 0,3V at room temperature and 1,4V at 55°C ambient @ 900mA load at L+ (two ports enabled at max. load).
SDCI-Ports (IO-Link compatible)
- 4 SDCI-Ports (IO-Link® compatible)
- Connector M12 (female)
- Class A (max. 450mA L+ per Port)
- Communication speeds COM1, COM2, COM3 (Auto-Detect)
- Operating mode: IOL (DO and DI currently not supported)
| Pin | Connection |
|---|---|
| 1 | L+ |
| 2 | Future use DI/DO |
| 3 | L- (GND) |
| 4 | C/Q |
The output current on the L+ and C/Q lines are monitored to not exceed 450mA per port on L+ and 350mA on C/Q (@ 20°C, higher temperatures lead to lower output current). The user, however, shall not install devices that exceed the above current consumption limits (consult device datasheet for reference).
Ethernet
- 1000MBit, RJ45
- IPv4 as DHCP client or with fixed IP address (see Ethernet configuration)
RTC/Battery
The Pinebox is equipped with an Real-Time-Clock (RTC) that will provide accurate time to the device without network connection. The clock is powered with a CR2032 battery with a lifetime expectation of >1year (the battery is not consumed while power is applied).
Others
- 1 USB-A port for future extension, max. cable length <1,5m