• Dual IO-Link Master Transceiver Analog Devices MAX14816 with Integrated Framers and L+ Supply Controllers
• SPI-Mode only (RX/TX not used)

Dimensions

• 65,5 × 66 mm
• Height: 18 mm with stack-through

Mounting

• 4×2,5 mm Screwholes (Compatible with Raspberry Pi mounting holes)

Temperature range

• -25 °- 60 °C
• Non-condensing humidity

Voltage supply

• 24V DC (+/-20 %), Current consumption max. 1300mA
• 3V3 DC (+/-5%) from Raspberry Pi < 50mA, over 40-Pin GPIO or generic interface (for IO-Link-Driver-IC logic and LEDs)

2 SDCI-Ports

• Screw plug-in terminal 3,5mm
• Class A (max. 500mA per port)
• Speeds COM1, COM2, COM3 (auto-detect via software)
• Operating mode: IOL
• 1 LED per port (red/green, user controllable)

40 Pin GPIO Connector (PT-1201 only, for connection to Raspberry Pi, as stack-through)

• SPI 1 (MISO, MOSI, CLK)
• Port 1/2: SPI_CE0, GPIO24 (interrupt)
• Port 3/4: SPI_CE1, GPIO25 (interrupt)
• 3V3/GND

Generic Connector (PT-1202 only, for single-board computers other than Raspberry Pi)

• SPI (MISO, MOSI, CLK, CE)
• Interrupt (GPIO)
• 3V3, GND

• Status per port (red/green), controlled via software