iol-hat:hw-pro:1_basics:1.3_scope-of-delivery
1.3 Scope of delivery
The IOL HAT Pro is only available as HAT for the Raspberry Pi.
IOL HAT Pro for Raspberry Pi (Item PT-1203)
- 1x IOL HAT Pro with 40-pin GPIO connector incl. 2x jumpers for port selection, 1x jumper for IOL enable, 1xred jumper for RPi power
- 2x 4-pin connector for 2xSDCI port (3,5mm)
- 4x standoffs incl. nuts
- 1x 2-pin connector for 24 Volt connection (3,5mm)
iol-hat/hw-pro/1_basics/1.3_scope-of-delivery.txt · Last modified: by anla